Denon AVR-1613 Bedienungshandbuch PDF herunterladen (Seite 86)

Audio Delay

Default settings are underlined.

While viewing video, manually adjust the time to delay audio output.

Setting details

0ms – 200ms

•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” (vpage87) is set to

“On” and when a TV compatible with Auto Lip Sync is connected.

•Store “Audio Delay” for each input source.

Volume

Default settings are underlined.

Set the volume setting.

Setting items Setting details

Scale

Set how volume is

displayed.

0 – 98 : Display in the range 0.5 (Min) to 98.

–79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0 dB.

The “Scale” setting is applied also to the “Limit” and “Power On

Level” display method.

Limit

Make a setting for

maximum volume.

Off : Do not set a maximum volume.

60 (–20dB) / 70 (–10dB) / 80 (0dB)

Power On Level

Deﬁne the volume setting

that is active when the

power is turned on.

Last : Use the memorized setting from the last session.

Mute : Always use the muting on condition when power is turned on.

1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.

Mute Level

Set the amount of

attenuation when muting

is on.

Full : The sound is muted entirely.

–40dB : The sound is attenuated by 40 dB down.

–20dB : The sound is attenuated by 20 dB down.

Audio

Subwoofer Level

Default settings are underlined.

Sets the subwoofer on/off and its output level.

Setting items Setting details

Subwoofer

Turn subwoofer output on

and off.

On : The subwoofer is used.

Off : The subwoofer is not used.

NOTE

This can be set when the sound mode is “DIRECT” (vpage 64) and

the “Subwoofer Mode” (vpage94) is “LFE+Main”.

Subwoofer Level

Set the subwoofer output

level.

–12dB – +12dB (0dB)

Restorer

Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the

amount of data by eliminating signal components that are hard for the human ear to hear. The “Restorer”

function generates the signals eliminated upon compression, restoring the sound to conditions near those

of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer

sound with compressed audio signals.

Setting items Setting details

Restorer

Set the mode for

“Restorer”.

Off : Do not use “Restorer”.

Mode1 (High) : Optimized mode for compressed sources with very weak

highs (64 kbps and under).

Mode2 (Middle) : Apply suitable bass and treble boost for all compressed

sources (96 kbps and under).

Mode3 (Low) : Optimized mode for compressed sources with normal

highs (96 kbps and over).

•This item can be set with analog signals or PCM signal (Sample rate =

44.1/48 kHz) is input.

•“Restorer” settings are stored for each input source.

•This item default setting for “NETWORK” and “iPod/USB” is “Mode3

(Low)”. All others are set to “Off”.

•This cannot be set when the sound mode is set to “DIRECT”.

Basic version

Advanced version

Information

Advanced version

DVD

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 130 131

Kommentare zu diesen Handbüchern

Keine Kommentare

Denon AVR-1613 Bedienungshandbuch Seite 86

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Denon AVR-1613