
• Connect the speaker terminals with the speakers making sure that like
polarities are matched ((_ with (_, _ with 8) Mismatching of polarities will
result in weak central sound, unclear orientation of the various instruments,
and the sense of direction of the stereo being impaired
• When making connections, take care that none of the individual conductors
of the speaker cord come in contact with adjacent terminals, with other
speaker cord conductors, or with the rear panel
NOTE:
NEVER touch the speaker terminals when the power is on,
Doing so could result in electric shocks.
Speaker Impedance
• When speaker systems A and B are use separately, speakers with an
_mpedance of 6 to 16 _dohms can be connected for use as front speakers
• Be careful when using two paks of front speakers (A + B) at the same time,
since use of speakers with an impedance of 12 to I6 _/ohms
• Speakers with an impedance of 6 to I6 _/ohms can be connected for use
as center and surround speakers
• The protector circuit may be activated if the set is played for long periods of
time at high volumes when speakers with an impedance lower than the
specified impedance are connected
14
Connecting the speaker cords
Loosen by turning
counterclockwise
2 Insert the cord
3 Tighten by turning
clockwise
Push the lever
=4>
2 Inser[ the cord
=4>
3 Return the lever
Connecting banana plugs
bananaplug
\
Turn clockwise to tighten, then insert the
banana plug
I CENTER SPEAKER SYSTEM I
_#n_ @
@@=@_
@@, @(
@@,@(
i
D
_Y_ I
Connection iack for subwoofer with built-in
amplifier (super woofer), etc
To achieve Dolby Digital (AC-3) playback
effect, use a unit that can sufficiently
reproduce frequencies of under 80 Hz
FRONT SPEAKER SYSTEMS 1
System A
SURROUND SPEAKER SYSTEMS I
IFRONT SPEAKER SYSTEMS ]
System B
4- --
the speaker away to a position where it does not
have this effect
Kommentare zu diesen Handbüchern